CONNECTED home devices

€188,00 Retail price

It allows you to view a live feed of your entrance, monitor visitors and deliveries, and communicate with them through the app. When someone approaches or rings the doorbell, you receive a notification, can see who is at the entrance and speak to them, even when you are away.

Power and connectivity: Powered by a rechargeable battery and requires a Wi-Fi connection.

€67,00 Retail price

It provides a live view of your indoor space, records important events and sends notifications through the app. If motion is detected while you are away or when the area is not in use, you can immediately see what is happening and view the relevant video recording.

Power and connectivity: It is powered by mains electricity and requires a Wi-Fi connection.

€160,00 Retail price

It provides a live view of the outdoor areas of your property, records important events and sends notifications. If a person is detected at the entrance, in the garden, in the parking area or near another selected location, you can view what is happening live and access the relevant video recording through the app.

Power and connectivity: It is powered by mains electricity and requires Wi-Fi or Ethernet connection.

€245,00 Retail price

It provides a live view and records important events in outdoor areas, including locations where access to a power supply may be limited. If a person is detected at the entrance, in the garden, in the parking area or around the perimeter of your property, you receive a notification and can immediately check what is happening.

Power and connectivity: Powered by a rechargeable battery with solar charging and requires a Wi-Fi connection.

€34,00 Retail price

It detects movement in indoor areas and can send notifications or trigger automations. If motion is detected while you are away or when the area is not in use, you immediately receive a notification through the app.

Power and connectivity: It is powered by a battery and communicates with the Hub, without requiring a direct Wi-Fi or Ethernet connection.

€28,00 Retail price

It detects when a door or window is opened or closed and sends a notification. Through the app, you can see which entry point triggered the sensor and whether it remains open. This allows you to be notified if a door or window is opened when no activity is expected in the area.

Power and connectivity: It is powered by a battery and communicates with the Hub, without requiring a direct Wi-Fi or Ethernet connection.

€31,00 Retail price

It allows you to switch a compatible electrical device on or off through the app, a schedule or an automation. For example, a lamp, screen or other connected device can switch on and off automatically at the times you specify.

€41,00 Retail price

It integrates existing wired sensors and other compatible devices with the service, allowing you to monitor their operation and create automations. For example, you can use the app to check whether a garage door or entrance gate is open or closed and, provided that the mechanism and installation support this functionality, open or close it remotely.

€188,00 Retail price

It transforms a compatible lock into a smart lock, allowing you to lock, unlock and check its status through the Connected by Cyta app.

You can remotely control an entrance or another compatible door and create an automation that locks the door when the Away scenario is activated.

€72,00 Retail price

It is a supplementary equipment. Where required, it allows you to unlock the door using a personal PIN, without requiring a key or mobile phone.

You can create different codes for the people you choose. For example, you can create a temporary code for a visitor or service provider and deactivate it when it is no longer required.

€53,00 Retail price

It is an optional equipment. Where required, it replaces the existing door cylinder to ensure the Tedee GO smart lock can be installed correctly, while retaining the option to use a conventional key.

Compatibility check: Insert one key into the lock on the inside of the door and try to unlock it from the outside using a second key. If the door unlocks normally, the existing cylinder is compatible and the optional cylinder is not required.

€29,00 Retail price

It allows you to switch an electrical circuit or compatible electrical device on and off through the app, a schedule or an automation. For example, you can set outdoor lighting or another connected device to switch on automatically at sunset and switch off at a specified time.

Installation and connectivity: It is installed behind the wall switch and supports the control of one circuit. It communicates with Hub and does not require a direct Wi-Fi or Ethernet connection.

€40,00 Retail price

It allows you to control two electrical circuits independently through the app or the existing wall switches. For example, you can control two separate lighting zones, even when both circuits are connected to the same double switch and switch them off together through automation.

Installation and connectivity: It is installed behind the wall switch and supports the control of two circuits. It communicates with Hub and does not require a direct Wi-Fi or Ethernet connection.

€90,00 Retail price

It allows you to control two electrical circuits independently or manage a compatible higher-load circuit through the app or the existing switches. It is suitable for locations requiring centralised circuit management or a longer communication range. For example, you can set different lighting zones to operate independently or according to schedules and other automations. It can also be used to control a compatible water heater, subject to the applicable installation requirements.

Installation and connectivity: It is installed on the electrical distribution board and supports the control of two circuits. Long Range technology provides extended communication range with the Hub, without requiring a direct Wi-Fi or Ethernet connection.

€70,00 Retail price

It allows you to switch compatible lights on and off and adjust their brightness through the app or the existing wall switch. It also supports schedules and automations, allowing the lighting to adjust automatically according to the time of day and the needs of your space.

Installation and connectivity: It supports the control of one circuit and communicates with Hub, without requiring a direct Wi-Fi or Ethernet connection.

€42,00 Retail price

It allows you to open, close and adjust the position of compatible electric roller shutters or blinds through the app or the existing wall switch. It also supports schedules and automations, allowing shutters to open or close automatically at specified times or when an Away scenario is activated.

Connectivity: It communicates with Hub and does not require a direct Wi-Fi or Ethernet connection.

€31,00 Retail price

It allows you to switch a compatible electrical device on or off through the app, a schedule or an automation. For example, a lamp, screen or other connected device can switch on and off automatically at the times you specify.

€29,00 Retail price

It allows you to switch an electrical circuit or compatible electrical device on and off through the app, a schedule or an automation. For example, you can set outdoor lighting or another connected device to switch on automatically at sunset and switch off at a specified time.

Installation and connectivity: It is installed behind the wall switch and supports the control of one circuit. It communicates with Hub and does not require a direct Wi-Fi or Ethernet connection.

€40,00 Retail price

It allows you to control two electrical circuits independently through the app or the existing wall switches. For example, you can control two separate lighting zones, even when both circuits are connected to the same double switch and switch them off together through automation.

Installation and connectivity: It is installed behind the wall switch and supports the control of two circuits. It communicates with Hub and does not require a direct Wi-Fi or Ethernet connection.

€90,00 Retail price

It allows you to control two electrical circuits independently or manage a compatible higher-load circuit through the app or the existing switches. It is suitable for locations requiring centralised circuit management or a longer communication range. For example, you can set different lighting zones to operate independently or according to schedules and other automations. It can also be used to control a compatible water heater, subject to the applicable installation requirements.

Installation and connectivity: It is installed on the electrical distribution board and supports the control of two circuits. Long Range technology provides extended communication range with the Hub, without requiring a direct Wi-Fi or Ethernet connection.

€70,00 Retail price

It allows you to switch compatible lights on and off and adjust their brightness through the app or the existing wall switch. It also supports schedules and automations, allowing the lighting to adjust automatically according to the time of day and the needs of your space.

Installation and connectivity: It supports the control of one circuit and communicates with Hub, without requiring a direct Wi-Fi or Ethernet connection.

€42,00 Retail price

It allows you to open, close and adjust the position of compatible electric roller shutters or blinds through the app or the existing wall switch. It also supports schedules and automations, allowing shutters to open or close automatically at specified times or when an Away scenario is activated.

Connectivity: It communicates with Hub and does not require a direct Wi-Fi or Ethernet connection.